Water Tank Manufacturing

Water Tank manufacturing

Visit this plant and see actual production

Contact 9730175469 / 9730173696.

Here you will get basic information about Water Tank manufacturing, for more details, click here

Basic requirements for Water Tank manufacturing:

• Land: 10000 sq. ft.
• Electricity: 50hp
• Manpower: 5 to 6

Raw material requirements:

• LLDPE granules

Machinery requirements:

• Roto Moulding Machine size 13’x7’ complete with 15 HP, 5HP and 2 Nos. of 3 HP Motors, 19 number of burners two reduction gear boxes Rotary shaft and connecting rulers.
• Plastic welding Machine
• Hoist Chain Pulley with stand
• D. G. Set 40 KVA Capacity
• Moulds of various sizes
• Spray Compressor
• Grinding Machine with motor

Manufacturing process:

The LLDPE granules are mixed with granules of black colour concentrates. These are extruded and strands are chopped as granules so as to achieve uniform distribution of carbon black. The granules are pulverized in a special pulverization system to 30 to 40 mesh powder. This powder is fed in the mould in the required quantity. The burners of the Roto Moulding Machine are fired with help of LPG or Diesel and the moulds are heated to 3000C to 350 0 C. Molten powder when rotated in the heated moulds form hollow storage tank. After proper time when the tank is ready, the mould is cooled and opened and the tank is taken out. Finishing of the tanks is done manually.

Source:

https://www.dcmsme.gov.in/reports/ROTOMOULDEDPLASTICWATERSTORAGETANKS.pdf

Close Menu
error: Content is protected !!