Thermoforming Plant

Thermoforming

Visit this plant and see actual production

Contact 9730175469 / 9730173696.

Here you will get basic information about Thermoforming, for more details, click here

Basic requirements:

• Land: 2000 sq. Ft.
• Electricity: 50hp
• Manpower: 4 to 5

Raw material requirements:

The major raw materials used for thermoforming are high impact polystyrene ABS, PVC, Polypropylene, HDPE, Polycarbonate etc. The choice of each material depends upon the end-user requirements and cost. The most common materials used for disposable wares are high impact polystyrene (Considered), PVC and Polypropylene

Machinery requirements:

• Automatic vacuum forming machine with control panel
• Roller cutting machine
• Aluminium mould with cutting mould
• Sheet plant two layer
• Compressor
• Grinder
• Cooling tower

Manufacturing process:

Thermoforming is a manufacturing process for thermoplastic sheet or film. The sheet or film is heated between infrared, natural gas and other heaters to its forming temperature. Then it is stretched over or into a temperature-controlled, single-surface mould. Cast or machined aluminium is the most common mol material, although epoxy, wood and structural foam tooling are sometime used for low volume production. The sheet is held against the mould surface unit until cooled. The formed part is then trimmed from the sheet. The trimmed material is usually reground, mixed with virgin plastic, and reprocessed into usable sheet.

Source:

https://www.udyamimitra.in/Default/DownloadFile/Thermoforming.pdf

Close Menu
error: Content is protected !!